cggill85 Posted June 21, 2021 Share #1 Posted June 21, 2021 Hello everyone! This is my first post, and my current project. I purchased this HGU-22/P helmet shell a couple of weeks ago (there are a few others still available on eBay). My plan is to create as complete of a restoration as possible and maintain the authenticity to the era. As you can see, there is a sticker on the back that points to 1977 (since been removed); it also came with a "Unserviceable Tag" that is dated 1988. The visor is from an HGU-26 that I purchased separately. I found some original, NOS "Camouflage Film" that matches the helmet and am excited to apply to the visor today. The edgeroll came with the helmet and is in pretty good condition. I think it is some kind of synthetic leather with foam underneath. I have a nape/chinstrap assembly that I'll be putting on soon. Any feedback on the project or insights into this type of helmet or era would be greatly appreciated! I'm a little uncertain of the interior setup of the shell, especially the earcups/headphone assembly. Link to comment Share on other sites More sharing options...
cggill85 Posted June 22, 2021 Author Share #2 Posted June 22, 2021 Here are some updated pictures with the camouflage film applied. These come in 12"x12" squares, so I cut them in 1" strips to match how it was originally done on the helmet. Using a heat gun, I was able to smooth out some of the wrinkles. The shade of light green is slightly more yellow on the original; his may be due to sun exposure. Overall, a really fun project so far. I enjoy piecing helmets together more than buying as a complete whole. While it seems to end up being more expensive to do this, the process of re-construction allows me to become more intimate with the design and experience of the helmet. I imagine that pilots and aircrew were responsible for taping up helmets themselves, so this allows me to take part in that journey. Link to comment Share on other sites More sharing options...
mohawkALSE Posted June 22, 2021 Share #3 Posted June 22, 2021 Nice start you have there, that edge roll being mint is a solid to work with. Having that thick edgeroll it probably had a 2 piece pour fit custom liner. The headset would be the standard USAF H-154 setup with the grey ear cups and H-143 speakers. You have the nape strap for the rear so you would need the chin strap for the front. Not really much missing there if you can source those parts which shouldn't be too hard. Was good to find the film tape to get that DVH matching the shell. Nice late 70s-early 80s setup helmet there. That DRMO label on the rear has the Form Date of 1977, so that has nothing to do with the helmet itself, just that that form was created in 77. The unservicable tag obviously shows the year it was Red Xd and pulled from service probably being replaced by a HGU-55. Keep us updated on the progress. Link to comment Share on other sites More sharing options...
cggill85 Posted June 22, 2021 Author Share #4 Posted June 22, 2021 Thank you, mohawk! I appreciate the details on the headset and speakers--gives me direction to start searching. Yes, the date of 1977 on the tag probably only relates to when the label was created. As I get more parts I'll post updates :) Link to comment Share on other sites More sharing options...
Vark_07 Posted June 22, 2021 Share #5 Posted June 22, 2021 This is indeed a very nice start, and even if it's still missing some parts, it's in a pretty good condition - you'll just have to find and add, which is a fun endeavour. Saw these shells' listings too, but honestly didn't give them a shot, even if I'm looking for one of these camouflaged 22-26/P. As you stated correctly, a refurbishment project of this kind can be expensive (been there / done that with a SPH-3B a couple of months ago 😁) - especially if you intend to pair it with a complete MBU-5/P (with "J" offset bayonets and crossed harness assembly). The NOS camo tape sheet is a cool find and you did a good job applying it to the PRU-36 housing, although you'd have had the alternative to find a visor housing already taped (some are available on the used market, and sometimes with embossed Dymo name labels sticked). Knowing this, if you have an old Dymo label maker in a drawer, you should add your name to your helmet ! As Mohawk stated, I concur the poured liner would be a 2-part one maintained in place by the edgeroll your helmet sports, and characteristic of these late-70's shells (the older 22-26/P with the thin tan edgeroll featured a styrene liner + fitting pads). It would be of the same kind of this one, but finding a specific 26/P example will be perhaps tricky. I wonder if a 33/P liner of the same size could fit ? Anyway, keep the good work up, I'll be looking forward to your updates 😉. Link to comment Share on other sites More sharing options...
hink441 Posted June 23, 2021 Share #6 Posted June 23, 2021 Nice work. If you heat up the tape with a hair dryer before application you will typically get good results. Chris Link to comment Share on other sites More sharing options...
Wayward Son Posted June 23, 2021 Share #7 Posted June 23, 2021 This YT video has a pretty good tutorial on how to tape a flight helmet with excellent results. An added bonus is that the example is a HGU-26/P using the same camo tape. Link to comment Share on other sites More sharing options...
Wayward Son Posted June 23, 2021 Share #8 Posted June 23, 2021 To further assist in the rebuild, here are a couple detail pics from my HGU-26/P just as it was when it came out of service. I'll get around to replacing the ear cup foam one of these days..... Link to comment Share on other sites More sharing options...
phantomfixer Posted June 23, 2021 Share #9 Posted June 23, 2021 great video wayward... Link to comment Share on other sites More sharing options...
cggill85 Posted June 28, 2021 Author Share #10 Posted June 28, 2021 Thanks everyone so much for the references! Based on the prices and availability of the helmet components, this will probably be a long-term build. I will post updates as they come; what a great forum! Link to comment Share on other sites More sharing options...
cggill85 Posted July 17, 2021 Author Share #11 Posted July 17, 2021 Here’s an update on the helmet. The MBU-5/P mask is a converted quick-don. Bit the bullet and bought the J connectors at full price, but made the harness myself. The form fit liners are quite expensive, so I made the center piece out of foam and fabric. Overall happy with where it is at right now. I’ll update more original parts as I come upon them. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
cggill85 Posted July 17, 2021 Author Share #12 Posted July 17, 2021 Here’s an update on the helmet. The MBU-5/P mask is a converted quick-don. Bit the bullet and bought the J connectors at full price, but made the harness myself. The form fit liners are quite expensive, so I made the center piece out of foam and fabric. Overall happy with where it is at right now. I’ll update more original parts as I come upon them. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Vark_07 Posted July 17, 2021 Share #13 Posted July 17, 2021 It came out pretty well the way you did with your latest mods, it will sure make the job aesthetically speaking while waiting to find the original parts ! Now you'd be mostly looking for a genuine form fit liner, and the mask's coiled comm cord. I'd just tighten up the chin and upper mask straps if I were you, for they look a bit loose. Good job 👍. Link to comment Share on other sites More sharing options...
Wayward Son Posted July 18, 2021 Share #14 Posted July 18, 2021 I like it! Looks fantastic. B. Link to comment Share on other sites More sharing options...
cggill85 Posted July 18, 2021 Author Share #15 Posted July 18, 2021 Thanks Vark and Wayward! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Mikeym_us Posted December 6, 2021 Share #16 Posted December 6, 2021 On 6/23/2021 at 12:49 PM, Wayward Son said: To further assist in the rebuild, here are a couple detail pics from my HGU-26/P just as it was when it came out of service. I'll get around to replacing the ear cup foam one of these days..... What comm wire is that? Want to know what to get when I decide to buy a HGU-26 shell. Link to comment Share on other sites More sharing options...
mohawkALSE Posted December 6, 2021 Share #17 Posted December 6, 2021 45 minutes ago, Mikeym_us said: What comm wire is that? Want to know what to get when I decide to buy a HGU-26 shell. The jack with locking button coming out of the grommet is the CX-4708/AIC headset cable. That is what connects the 2 H-143 earphone elements together. Then a branched cable would be plugged into this, either being a usual CX-4707/AIC which is the coiled comm cable that would be installed on the oxygen mask. There are other branched cabled assemblies that can be used for other non oxygen mask only applications for both boom only or boom and mask. Link to comment Share on other sites More sharing options...
Mikeym_us Posted December 6, 2021 Share #18 Posted December 6, 2021 2 minutes ago, mohawkALSE said: The jack with locking button coming out of the grommet is the CX-4708/AIC headset cable. That is what connects the 2 H-143 earphone elements together. Then a branched cable would be plugged into this, either being a usual CX-4707/AIC which is the coiled comm cable that would be installed on the oxygen mask. There are other branched cabled assemblies that can be used for other non oxygen mask only applications for both boom only or boom and mask. Thanks That helps alot. I am looking at one on Ebay that I'll just pull the camo film off of it and repaint it as a HGU-26 off of a FB-111. I might keep it for myself or give it to my dad who was a FB-111 mechanic from 1979-1981 before moving on to F-15C's with the 1st TFW out of Langley. Link to comment Share on other sites More sharing options...
mohawkALSE Posted December 6, 2021 Share #19 Posted December 6, 2021 2 minutes ago, Mikeym_us said: Thanks That helps alot. I am looking at one on Ebay that I'll just pull the camo film off of it and repaint it as a HGU-26 off of a FB-111. I might keep it for myself or give it to my dad who was a FB-111 mechanic from 1979-1981 before moving on to F-15C's with the 1st TFW out of Langley. Alot of the FB-111 units actually used the camo film helmets, was pretty common with SAC bomber and tanker crews and TAC fighter crews in the 80s. I have seen some pics of 111 units when they actually transitioned to the 55P helmets having a dual visor with the PLTZ nuclear flash mount installed and they were removed from the camo 26P helmets. Still had the camo film on the housing installed on a grey 55P. Link to comment Share on other sites More sharing options...
Vark_07 Posted December 6, 2021 Share #20 Posted December 6, 2021 As Mohawk stated, don't remove the camo tape, it's relevant to this era, and that would be a crime IMO ! 😁 In the 79-81 period, many SAC (FB-111A and B-52s) shells were woodland taped, then they were progressively replaced by HGU-55/Ps as of 1985 but some were still in use in the late 80's depending on the units. Here's a SAC shells montage I made for another thread, and as you can see : FB-111A crews among them. Here are the 55/P shells (FB-111A crews as well) with older camo taped housings used on 26/P that Mohawk was talking about (Red Flag 1987) Link to comment Share on other sites More sharing options...
Mikeym_us Posted December 7, 2021 Share #21 Posted December 7, 2021 1 hour ago, Vark_07 said: As Mohawk stated, don't remove the camo tape, it's relevant to this era, and that would be a crime IMO ! 😁 In the 79-81 period, many SAC (FB-111A and B-52s) shells were woodland taped, then they were progressively replaced by HGU-55/Ps as of 1985 but some were still in use in the late 80's depending on the units. Here's a SAC shells montage I made for another thread, and as you can see : FB-111A crews among them. Here are the 55/P shells (FB-111A crews as well) with older camo taped housings used on 26/P that Mohawk was talking about (Red Flag 1987) Problem I have is the tape is difficult to come by. Closest I can find is woodland Duct tape. Link to comment Share on other sites More sharing options...
mohawkALSE Posted December 7, 2021 Share #22 Posted December 7, 2021 If you needed to tape a visor housing like the OP did above, the sheets of that woodland film used still pop up time to time on ebay. Link to comment Share on other sites More sharing options...
cggill85 Posted December 7, 2021 Author Share #23 Posted December 7, 2021 1 hour ago, Mikeym_us said: Problem I have is the tape is difficult to come by. Closest I can find is woodland Duct tape. Here you go: https://militarystripes.com/product/gi-us-air-force-flight-helmet-camouflage-adhesive-film-kmu-440-p-3-sheet-pack/ Link to comment Share on other sites More sharing options...
Mikeym_us Posted January 30, 2022 Share #24 Posted January 30, 2022 On 12/6/2021 at 9:23 PM, cggill85 said: Here you go: https://militarystripes.com/product/gi-us-air-force-flight-helmet-camouflage-adhesive-film-kmu-440-p-3-sheet-pack/ This is the shell I picked up in December. Sorry to say that 4 days after your post I got into a bad accident on the 10th of December and ended up dislocating and then breaking my shoulder then had shoulder surgery on the 28th 3 days before New Years Eve. I did get the film in plus a PRU-36 assembly and pretty much have every component on hand to do this up minus the fitting pads and spacer pads for the earcups. BTW this helmet is a former PLTZ helmet with additional fitting for the old snap on flash goggles. I also did pick up a brand new NIP PRU-36 visor cover with the metal reinforcement to use with this helmet kind of make it look close to a EEK-2 PLTZ visor cover. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now