tthen Posted February 13, 2018 Share #1 Posted February 13, 2018 Evening Gents, I have a few questions regarding the US Navy Commissioning Pennant. Moderators if this is in the wrong place please move to a more appropriate place. So my interest is to obtain a WW2 pennant that would have flown on an LCI (L) during the war. My father was on LCI (L) 950 they made the landing in the invasion of Southern France ( Operation Dragoon). After the war ended in Europe they were ordered to sail to Cold Harbor Alaska to trade their ship to the Soviet Navy For Project Hula. LCI (L) 950 became DS-32 when the soviets took over control. When the ship was decommissioned from the US Navy the commander chose to cut up the Commissioning Pennant and give a piece to each sailor including my dad. I am in possession of that piece, it has a Soviet Navy hat pin stuck in it my dad traded for a pack of Chesterfield cigarettes. I have been looking for a Pennant on Ebay and my biggest question is were there different sizes depending on the ship size? I see lots of No. 7, and last question in WW2 were the stars stitched on or were there also the style that look part of the fabric. I am watching Ebay # 202122044219 right now but am unsure if this is what fits the bill. Thank you in advance for any help Tom Link to comment Share on other sites More sharing options...
robinb Posted February 13, 2018 Share #2 Posted February 13, 2018 I know next to nothing about commissioning pennants. But with that being said here's mine from a late WW2 ship. The stars are sewn on. Link to comment Share on other sites More sharing options...
67Rally Posted February 13, 2018 Share #3 Posted February 13, 2018 That one looks odd in the auction. Then to see that he has others exactly the same makes me nervous. Here is a commissioning pennant that flew aboard CL-64 during her her service (1944-46). https://flic.kr/p/c1kWom Link to comment Share on other sites More sharing options...
MastersMate Posted February 13, 2018 Share #4 Posted February 13, 2018 In the FWIW department.. In mid 1950, the Coast Guard started a test on the best material for use in the commission pennant and CG ensign. They were evaluating the traditional wool bunting, a nylon / wool material, and an all nylon material.. I would think the USN followed the same tests in that same time frame.. Would suspect that WW2 era / pre 1950sh commission pennants would be all wool bunting with sewn construction.. Link to comment Share on other sites More sharing options...
tthen Posted February 15, 2018 Author Share #5 Posted February 15, 2018 Thanks men, will look for one with sewn stars. Link to comment Share on other sites More sharing options...
sigsaye Posted March 3, 2018 Share #6 Posted March 3, 2018 All nylon with printed stars have been in use since the early 1960s. Commission Pennants do come in different lengths, based on the length of the ship. Naval Tactical Publication (NTP-13) has a chart which tells what size flags and pennants are to be used on what length ship. Link to comment Share on other sites More sharing options...
tthen Posted March 4, 2018 Author Share #7 Posted March 4, 2018 Sigs, Thanks for wading in on this, I was hoping you would. If I Google (NTP-13) will I find what commission Pennant would have been flown above an LCI during WW2? Thanks again Steve, Tom Link to comment Share on other sites More sharing options...
29navy Posted March 4, 2018 Share #8 Posted March 4, 2018 NTP-13 B (1986) shows two sizes for a commission pennant, Size 6 - 6 feet in length and Size 7 - 4 feet. Not sure if it is the same in WWII, don't have my copy with me.. It also says this about size use: For uniformity, a vessel under 600 feet in length shall display a size 6 command pennant or a size 7 personal flag. Vessels 600 feet or more in length shall display a size 4 command pennant or size 6 personal flag. Don't know if this helps. Link to comment Share on other sites More sharing options...
tthen Posted March 6, 2018 Author Share #9 Posted March 6, 2018 29Navy, Yes it does Thank you for your reply Link to comment Share on other sites More sharing options...
sigsaye Posted March 22, 2018 Share #10 Posted March 22, 2018 Sorry for not coming back. Yes, flag size is determined by length of vessel. So, to know what size flags, need to know length of ship. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now