June 30, 20179 yr #1 Right now I am building a display in my room using galvanized steel pegboard (Amazon - 2 panels @ 16"x32" $24.97 w/free shipping). I am using various types of pegboard hooks and flat brackets that I got in a variety pack (Walmart - $4.97) to see what works best. The LMF II/ASEK with its legstraps sits best on flat brackets while some of the older M4 and M5s have a 1" J-hook for the handle and a 1/2" J-hook for the scabbard. My idea is to display a M1905, M1, M3, M4 leather, M4 plastic, M5, M5A1, M6, M7, M9, and ASEK. This is a work in progress, but here's where I am. Let me know what you think!
June 30, 20179 yr #6 Please permit me to offer a suggestion that I have used in the past. Cover the peg board with a fabric of your choice. Separating the blade from the scabbard, and using nylon fishing line,, tie off first the bayonet by passing the line from the back through the desired hole, and again through the hole above/below, and tie it off. Do one tie where the blade meets the crossguard, and the othe near the tip of the blade. Then do the same thing with the scabbard aligned to the blade. The line is strong enough to hold, and will be virtually invisible to the eye. This techniques eliminates the metal hooks and the holes.
June 30, 20179 yr Author #7 Thanks for the comments! Jack, I see where you are going, interesting idea.
June 30, 20179 yr #8 Nice looking display. Seems like something that I would like to replicate in the future. Thanks for sharing! -Hunt
June 30, 20179 yr Author #9 Here's what I bought if anyone is interested: https://www.amazon.com/Heavy-Pegboard-Round-Galvanized-Steel/dp/B011SF01L8/ref=sr_1_3?ie=UTF8&qid=1498855898&sr=8-3&keywords=steel+pegboard
July 1, 20179 yr #11 Matt, Neat idea! I have always liked displays that allow you to pick-up each piece and check it out. Hard to do in a "vertical" format but this is a great way to do that. 2 thumbs up! All you need is a couple USMC KaBars in there to class things up, and I think you"ll be there!!!!
July 1, 20179 yr Author #12 You've got a good start there. Keep it up. Is that M9 a tan Lan Cay? Marv Phrobis M9 I picked up after Desert Storm at the US Cavalry store outside Fort Bragg. I did a thread on it here: http://www.usmilitariaforum.com/forums/index.php?/topic/105595-my-desert-tan-m9-bayonet/?hl=bayonet Sgt. BARney, that was my intention, to be able to pick them up. I do need a good KaBar or two! Thanks for the positive feedback!
July 1, 20179 yr Author #13 Another trip to the local Walmart last night yielded these 2" brackets with red tip covers ($1.76 for 4) that allow the bayonets to lay flat without the worry of the J-hook scratching the handle or scabbard. M5 with J-hooks M7 BOC on flat brackets 2 of the brackets
July 6, 20179 yr #14 a long time ago home depot/lowes used to carry small air or water tubing that slipped neatly over peg board pegs. You could buy a roll and cut it to length, etc.
July 7, 20179 yr Author #16 I bought 2 feet of 1/4" clear tubing at the hardware store ($1.05) and put it over the hooks. Good advice! Thus far I have about $36 in this display.
July 10, 20179 yr Author #17 I think I have found all my bayonets, plus a few repro place fillers (like the M3 in a M6).
October 14, 20178 yr Author #20 Bumping this a few months later after adding a couple of M6s, M7s, and a few other assorted knives. It's looking crowded now, wish I had room for another panel!
October 14, 20178 yr #21 MattS, very nice display! Can you open a window and take a pic. with natural light, no flash? Chuck
October 14, 20178 yr Author #22 Unfortunately it's in the corner farthest from the window behind the door.
December 26, 20178 yr #24 Here is what I put together. I salvaged a couple 36"x 60" double locking door bulletin boards from a company I had worked for. I needed more depth than just one could provide so I took the cork backing off one and stacked it on top of another that I took the doors off of and fastened them together. I covered the cork backing with a burlap that I acquired at a local fabric shop. After mounting to the wall I drilled holes in the cork backing to accept 1/8" round metal rod stock cut to the length needed to support each individual knife. These rods were then covered with clear flexible plastic tubing cut to the appropriate length. Finished by installing a LED light ribbon around the interior top and sides.
December 26, 20178 yr #25 Wow, very nice. Museum quality display. Here is what I put together. I salvaged a couple 36"x 60" double locking door bulletin boards from a company I had worked for. I needed more depth than just one could provide so I took the cork backing off one and stacked it on top of another that I took the doors off of and fastened them together. I covered the cork backing with a burlap that I acquired at a local fabric shop. After mounting to the wall I drilled holes in the cork backing to accept 1/8" round metal rod stock cut to the length needed to support each individual knife. These rods were then covered with clear flexible plastic tubing cut to the appropriate length. Finished by installing a LED light ribbon around the interior top and sides.
Create an account or sign in to comment