Jump to content
bob lamoreaux

Cleaners, Lubes, Protectants

Recommended Posts

In my advancing age, I can't remember if I posted this topic before! Didn't see it, anyway and was thinking about it when reading the post and replies regarding the 1911 with the brown patina.

 

I used to use Hoppe's, Gun Lube, or other teflon spray to clean, lube, and protect my firearms (and in some instances, knives). Now there seem to be a boatload (using this term because of the family nature of the site) of CLPs, with "BreakFree" seeming to be the most popular.

 

Did some "research" on the 'Net and came across a comparison of various brands of CLPs as well as other things (motor oil, for example) used to protect metal. Purchased two to try out, with nothing of significance to report at this point. However, I did want to know if anyone has used these products extensively and whether the results were satisfactory. This type of info might of interest and help to collectors and users of firearms, knives, etc. that need to be protected from rust while maintaining reasonable (and non-sticky) lubrication.

 

The two products I tried were (can't remember the brand) molydebnum disulfie powder in a spray can and a product called EEZOX.

 

The moly disulfide is really slippery, but it comes out like an elephant stomped on a tube of powdered graphite! I used this in my little den and still have a dirty mess. Also used it on a squeeking car door hinge and the track and worm drive of an electric garage door. Worked very well on both. Used it on one firearm (a Mauser HSc) and it went everywhere! Blacked out the red dot on the safety.

 

The EEZOX comes out as a liquid spray. It is a Cleaner, Lube, Protectant. Supposed to leave a very thin film on the metal after cleaning. It will dry and supposedly lubricate as well as protect. It will allegedly make the metal impervious to fingerprints or finger oil that may cause some corrosion. If one uses this product, make sure that it is used outdoors or in a VERY well vented area. I used it in my "den" and had a cheap high for a day and a half.

 

Anyway, the issue is: what are the products being used to protect your collectibles as well as your "useables" and how effective are they? I'll report back after I've fired some of these treated firearms.

 

Bob

Share this post


Link to post
Share on other sites

In my shop and with the military, I have tried a lot of different chemicals to try to preserve firearms and maintain functionality. Well the results are as follows

 

C.L.P. : Do not walk away, run..... If using as a cleaner fine, just is an almost anti- preservative. Leave a film that when drys attracts a lot of dust and crud... Bad, possibly fatal in a desert climate.

 

L.S.A. and bore cleaner: Not bad, used it for years. Just make sure you get the bore cleaner (used as one hell of a cleaner) off before treatment with clp. The clp dries and leaves a almost grease like residue. Good inside a fire arm. Not so good outside, but dose not attract a lot of crud. Word of warning. The clp is effected by the cold weather and will effect the functionality of the weapon. Found this out the hard way..........

 

Graphite: As you found out, messy and seems to attract powder fouling.....

 

Parts washer: If you have access to one of these, these are a god sent! Use the non solvent ones if you can. These are less rough to the sometimes fragile finish. Word of warning: these will strip the cleaned item of any preservative what so ever. And you must treat with oil shortly after it dries.

 

Hoppies: Good, but not the best.

 

Gunzilla: Odd name, but was turned on to this in gods catbox. It is a CLP that actually works. No residue that attracts crud. Has a cleansing power that penetrates rust and will clean it off. It works a a bore cleaner also. Than you can coat the bore as a protective after cleaning. Little hard to find, but is wort giving a try. I use it by the quart in the shop....


Dirteater101

 

Head Gun junkie

Old Trooper Gunsmiths

 

"Support your local gunsmith; Shoot something till it breaks!"

Share this post


Link to post
Share on other sites

This is great info.

 

I posted a link to the thread in our Preservation supplies forum.


HONORING FAMILY LtCol Wm Russell (1679-1757) VA Mil; Pvt Zachariah McKay (1714-97) Frederick VA Mil; BrigGen Evan Shelby, Jr (1719-94) VA Mil; Pvt Vincent Hobbs (1722-1808) Wythe VA Mil; Pvt Hugh Alexander (1724-77); Lt John R. Litton (1726-1804); Bvt BrigGen/Col Wm W. Russell (1735-93) 5th VA Rgmt; Lt James Scott (1736-1817); Capt John Murray, Sr (1747-1833); Capt John Sehorn, Sr (1748-1831) VA Mil; Pvt Corbin Lane (1750-1816) Franklin/TN Mil; Cpl Jesse D. Reynolds (1750-1836) 5th VA Rgmt; Capt. Solomon C. Litton (1751-1844); 1Lt Christopher Casey (1754-1840) SC Mil; Pvt Mark Adams (1755-1828); Pvt Randolph White (1755-1831) Bailey's Co. VA Rgmt; Capt. John R. Russell (1758-1838); Pvt Joseph T. Cooley (1767-1826) Fort Hempstead Mil; Pvt Thomas Barron (1776-1863) 1812; Capt. John Baumgardner (1787-1853) VA Mil; Pvt Joel Estep (1828-1864) Co B 5th KY Inf CSA & US; Pvt George B. Bell (1833-1910) Co C 47th IL Inf US; Cpl Daniel H. Barron (1838-1910) Co B 19th TN Rgmt Inf CSA; Capt Richard K. Kaufman (1908-1946) 7th PRG/3rd AF CCU; T-5 Vernon L. Bell (1926-95) 1802nd Spec Rgmt; PO2 Murray J. Heichman (1932-2019) HQSB/MCRD; PFC Jess Long (1934-2017) US Army; PFC Donald W. Johnson (1931-) 43rd ID HQ; A1C Keith W. Bell (1931-2011) 314th TCW; A3C Michael S. Bell (1946-) 3346th CMS; A1C Sam W. Lee (1954-2017) 2d BW; AW3 Keith J. Price (1975-) VP-10; 1Lt Matthew Wm Bell (1985-) 82nd Abn/SOC








Share this post


Link to post
Share on other sites

G-96. I use it on every thing from pistols to belt feds. Excellent product. http://www.g96.com/ It was recommended to me by a couple of long time Luger collectors.


donation2008.gifdonation2010.gifdonation2013.gif

 

Looking for original photos and other items from the First World War US 77th Infantry Division.

Also interested in BAR and M1917A1 BMG related items.

Share this post


Link to post
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.