MattS Posted July 29, 2020 Share #1 Posted July 29, 2020 I picked up a late 1943 (by the lot number) front seam, fixed loop M1 shell with both loops broken off and only the feet remaining. Shell seems to have original paint and came with a somewhat ratty P55 liner (1955-1963) that I've since repaired (torn strap, no tie, missing nape strap and sweatband) for $20. My questions are about the current thoughts on repairing broken fixed loops. Does it improve or hurt the value (which in this case is minimal). Will more damage be done trying to remove the feet and rewelding new loops on than it's worth? I have no welding equipment and would have to have someone do this. And what's the cost to do something like this, has anyone done it recently? I know Josh Murray used to offer this service, not sure he still does. Is it worth it to do? I know it comes down to, "it's your helmet, do what you want with it", just looking for current opinions on the subject. Thanks! Link to comment Share on other sites More sharing options...
ispy Posted July 29, 2020 Share #2 Posted July 29, 2020 I repair my own helmets as technically there's not a lot to them. I can't comment on the value whether it decreases it but as you would know most helmet collectors are purists and don't like them to be cleaned. Saying that i can't live with a post war damaged pot so i do what i can to conserve and repair. The feet will need to be removed, I'd remove them slowly with a dremel and cutting discs as I have done similar before. By doing this you will also be preparing the surface for new welds. Don't weld unless you have the experience as a novice will blow a hole quite easily in a helmet. The cost of re-welding would be minimal as it's not a difficult job and not time consuming. There are a lot of good welders in the bicycle field where they need to repair finer things. I hope that helps somewhat. Link to comment Share on other sites More sharing options...
MattS Posted July 29, 2020 Author Share #3 Posted July 29, 2020 Thanks for the comment! I agree, most collectors don't want a repaired helmet, but it looks sad to me without straps on it. And no worries, I most definitely won't be welding on anything. Link to comment Share on other sites More sharing options...
ispy Posted July 29, 2020 Share #4 Posted July 29, 2020 I'm the same, if I can repair it to what it once was I will......seamlessly of course. Link to comment Share on other sites More sharing options...
The Rooster Posted July 29, 2020 Share #5 Posted July 29, 2020 It is possible that someone removed them during the war out in the field. Possibility? Welding will ruin the paint. Link to comment Share on other sites More sharing options...
Nickman983 Posted July 29, 2020 Share #6 Posted July 29, 2020 What are your plans for the helmet? I would really only say it's worth it if you want something for reenactment and/or you got the set really cheap and adding bails/chinstraps can be done for a few bucks. I don't think you'd really be hurting the value since a M1 without its bails is not really worth a whole ton. My only concern would be someone down the line representing it as all original. If you don't have much into the shell and it's got good, original paint it maybe it's worth it, but personally I would rather have a shell no bails rather than one that has been fixed. Link to comment Share on other sites More sharing options...
MattS Posted July 29, 2020 Author Share #7 Posted July 29, 2020 All good questions. They could have broken off in the field in WW2, or last week. No way of knowing. I don't have any plans for this helmet, just weighing options right now. Here's what I have to work with. Link to comment Share on other sites More sharing options...
MattS Posted July 29, 2020 Author Share #8 Posted July 29, 2020 44 minutes ago, Nickman983 said: I would really only say it's worth it if you want something for reenactment and/or you got the set really cheap and adding bails/chinstraps can be done for a few bucks. I'm into it for $20 right now, and I repaired the liner using parts I had on hand (that maybe cost another $5). Link to comment Share on other sites More sharing options...
Cap Camouflage Pattern I Posted July 29, 2020 Share #9 Posted July 29, 2020 You will need to clean up the area around the feet, which will require removing some of the paint, and the heat will burn the pant on the back (outside) of the shell, so it will probably require at least a touch-up Link to comment Share on other sites More sharing options...
gap Posted July 29, 2020 Share #10 Posted July 29, 2020 I vote leave it alone. Very possibly damaged in the field. Most soldiers didn’t use the chin strap anyway. Link to comment Share on other sites More sharing options...
MattS Posted July 29, 2020 Author Share #11 Posted July 29, 2020 9 minutes ago, gap said: I vote leave it alone. Very possibly damaged in the field. Most soldiers didn’t use the chin strap anyway. One vote for leave it alone, thanks! Link to comment Share on other sites More sharing options...
khakiweb Posted July 30, 2020 Share #12 Posted July 30, 2020 Here's a vote to 'repair it' Link to comment Share on other sites More sharing options...
MattS Posted July 30, 2020 Author Share #13 Posted July 30, 2020 10 hours ago, khakiweb said: Here's a vote to 'repair it' Thanks for that! Link to comment Share on other sites More sharing options...
Blacksmith Posted July 30, 2020 Share #14 Posted July 30, 2020 An item is only original once. However the bales were broken off is part of its history. I wouldn’t try to reverse that. And as others have said, it will look like a repair job anyway. I’d leave it. Link to comment Share on other sites More sharing options...
MattS Posted July 30, 2020 Author Share #15 Posted July 30, 2020 30 minutes ago, Blacksmith said: An item is only original once. However the bales were broken off is part of its history. I wouldn’t try to reverse that. And as others have said, it will look like a repair job anyway. I’d leave it. Very valid point, thanks! Link to comment Share on other sites More sharing options...
BILL THE PATCH Posted July 30, 2020 Share #16 Posted July 30, 2020 I have a fixed loop That was turned into a flower pot, that also is the history of the pot. But I decided to erase that history, so either bring it back to it's former glory or leave it. Sent from my moto g(7) play using Tapatalk Link to comment Share on other sites More sharing options...
Blacksmith Posted July 30, 2020 Share #17 Posted July 30, 2020 1 hour ago, BILL THE PATCH said: I have a fixed loop That was turned into a flower pot, that also is the history of the pot. But I decided to erase that history, so either bring it back to it's former glory or leave it. Sent from my moto g(7) play using Tapatalk Wow... that’s deep... It being turned into a flower pot changes its function. Matt’s helmet is still a helmet. Link to comment Share on other sites More sharing options...
jmd62 Posted July 30, 2020 Share #18 Posted July 30, 2020 I can see both sides Matt, but personally I would leave it alone since like others have pointed out, it's part of its history. So by adding you could be taking away Link to comment Share on other sites More sharing options...
MattS Posted July 30, 2020 Author Share #19 Posted July 30, 2020 1 hour ago, jmd62 said: I can see both sides Matt, but personally I would leave it alone since like others have pointed out, it's part of its history. So by adding you could be taking away I think you're right. If this had been painted purple and made into a planter, I could see restoring it. I think I'll leave it as is, the damage is part of its history. Maybe put a net over it and add a liner strap. Thanks for the comments, really helped me decide to just leave it alone and "first, do no harm" as they say. Link to comment Share on other sites More sharing options...
MattS Posted August 4, 2020 Author Share #20 Posted August 4, 2020 Here's the end result with a repro liner strap and net installed. Link to comment Share on other sites More sharing options...
MattS Posted August 4, 2020 Author Share #21 Posted August 4, 2020 The P55 liner that came with it, one strap repaired and repro sweatband (ATF $6.99) and liner strap (ATF $14.99) installed. Link to comment Share on other sites More sharing options...
CWG Posted August 4, 2020 Share #22 Posted August 4, 2020 10 hours ago, MattS said: The P55 liner that came with it, one strap repaired and repro sweatband (ATF $6.99) and liner strap (ATF $14.99) installed. You can get the chinstraps, and bales from J Murray for about $25-35 bucks in total and get the job done yourself, or you could have J Murray do it for you. If I wanted a nice complete display lid and I have already added the other parts to the liner I would just go all in and get the bales done. However its really up to you and what you want to do with your lid, either way it looks great! Link to comment Share on other sites More sharing options...
MattS Posted August 5, 2020 Author Share #23 Posted August 5, 2020 Thanks! I decided that if I assume the bales were broken off in wartime service, it's a war-damaged shell and I should just leave it alone. It's an assumption I can't prove though! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now