Keystone Posted December 15, 2018 Share #1 Posted December 15, 2018 An Infantry Equipment Board was assembled in 1874 to once again try to come up with a new system for the infantry to more efficiently carry all the necessary gear to be an effective fighting force. The 1874 pattern equipment was one of the army’s first attempts to come up with a complete “load carry” system that would meet all the soldier’s needs. Designed by men of great combat experience and with the full backing of the General of the Army, William T. Sherman, the equipment was adopted for use but would quickly be replaced. The tactics of the mid 1870’s would require different thinking than the board members experiences. The massed infantry assaults of the Civil War would give way to small unit hit and run campaigns against western tribes. By 1878 a redesigned set of equipment would be issued. The 1874 system was designed around a leather belt and braces. The braces and packs were designed and patented by Lt. George Palmer (US patents 139731, 157537 and 202663) and the belt was designed by Colonel Hagner of the Watervliet Arsenal. The cartridge boxes were designed and patented by Captain Samuel McKeever (US patents 139846 and 139847). The cartridge boxes, each containing twenty rounds of ammunition for the .45-70 rifle, and bayonet scabbard would be worn on the belt. The braces would attach to the belt via fixed loops on the belt plate. The haversack for the soldiers meat can and other mess gear and rations would be attached to the braces under the right arm. The clothing bag for other “non-essential” equipment would be attached in a similar fashion to the left side under the arm. The two packs would then be connected by a strap at the bottom. The system also had a set of “coat straps” that could hold the soldiers blanket, poncho and shelter half. A new set of mess gear, which included the cup, meat can (US patent 163359), knife, fork and spoon was adopted as well. The redesigned canteen utilizing a new strap and buckle was also adopted. Link to comment Share on other sites More sharing options...
Keystone Posted December 15, 2018 Author Share #2 Posted December 15, 2018 Rear view Link to comment Share on other sites More sharing options...
Keystone Posted December 15, 2018 Author Share #3 Posted December 15, 2018 Each cartridge pouch could hold 20 rounds of .45-70 ammunition. That's a lot of lead! Link to comment Share on other sites More sharing options...
Keystone Posted December 15, 2018 Author Share #4 Posted December 15, 2018 The haversack needed some work. The original buckles for the brace straps had the tongue removed and were rounded almost to a “D” shape to conform to the 1878 haversack specification. I used two tongues from later “relic” haversacks in my collection for repairs. I have only seen three or four of these original 1874 pattern packs. They were all in very bad condition. Here, you can see the pouch for the meat can and the connecting strap for the clothing bag. Link to comment Share on other sites More sharing options...
Keystone Posted December 15, 2018 Author Share #5 Posted December 15, 2018 The coat straps may be the most difficult part of the set to find. This example is only the second set I’ve ever seen. They came with the set of braces and, ironically, came up on eBay the same week the haversack did. I found the front connecting straps on line from S & S Firearms. The braces themselves seem to be fairly common. The belt and plate come up every so often but usually demand a high price. The cartridge boxes and bayonet are common and can usually be found in decent condition. The clothing bag is common as well. I picked up a box of .45-70 ammo recently and it fits perfectly in the pocket on the clothing bag. Link to comment Share on other sites More sharing options...
Keystone Posted December 15, 2018 Author Share #6 Posted December 15, 2018 The mess kit is a second pattern with the “D” ring in the center of the lid. The other parts of the mess gear were put together over several years. I finally picked up a late pattern canteen with the Chambers buckle to complete the set as it would have been worn in full marching order. Link to comment Share on other sites More sharing options...
Keystone Posted December 15, 2018 Author Share #7 Posted December 15, 2018 The set also came with a separate should strap for the haversack so it could be worn by itself, also with the adjustable Chambers buckle. The tunic is an 1874 pattern reproduction. Link to comment Share on other sites More sharing options...
bheskett Posted December 15, 2018 Share #8 Posted December 15, 2018 Keystone, thanks for sharing this is great stuff. If you decide you need an heir for all your stuff, I am adoptable:) Link to comment Share on other sites More sharing options...
BagmanL6 Posted December 15, 2018 Share #9 Posted December 15, 2018 What an informative posting! Very well done. In your research did you get a sense of production numbers for these items? Thank you. Link to comment Share on other sites More sharing options...
Keystone Posted December 15, 2018 Author Share #10 Posted December 15, 2018 Keystone, thanks for sharing this is great stuff. If you decide you need an heir for all your stuff, I am adoptable:) I'll have to run that one past my wife! Link to comment Share on other sites More sharing options...
Keystone Posted December 15, 2018 Author Share #11 Posted December 15, 2018 What an informative posting! Very well done. In your research did you get a sense of production numbers for these items? Thank you. Thanks, I don't have any production values but it couldn't have been very many sets. The army wasn't very big compared to the Civil War troop levels. Tim Link to comment Share on other sites More sharing options...
RustyCanteen Posted December 16, 2018 Share #12 Posted December 16, 2018 Very nice set. Link to comment Share on other sites More sharing options...
Bluehawk Posted December 16, 2018 Share #13 Posted December 16, 2018 Remarkable... Link to comment Share on other sites More sharing options...
The Iron Brigade Posted December 16, 2018 Share #14 Posted December 16, 2018 Very nice display. Link to comment Share on other sites More sharing options...
M24 Chaffee Posted December 16, 2018 Share #15 Posted December 16, 2018 Very interesting and cool set up! Frank Link to comment Share on other sites More sharing options...
crassou54 Posted December 16, 2018 Share #16 Posted December 16, 2018 I like really this amazing and complete "palmer " . thank's for share this essential , but short lived use equipment before massive weeb Mills equipment . Richard Link to comment Share on other sites More sharing options...
everforward Posted December 16, 2018 Share #17 Posted December 16, 2018 Great display..! Link to comment Share on other sites More sharing options...
ludwigh1980 Posted December 16, 2018 Share #18 Posted December 16, 2018 Exceptional presentation, thank you for taking the time to post. The frontier "skeleton army" as Thomas Nast sympatheticly portrayed in his illustrations will always hold a deep reverence with me. Link to comment Share on other sites More sharing options...
BEAST Posted December 18, 2018 Share #19 Posted December 18, 2018 Fantastic post! I've returned several times to reread it. Link to comment Share on other sites More sharing options...
eaglerunner88 Posted December 24, 2018 Share #20 Posted December 24, 2018 Wow those must be some rare pieces with their production/use being so limited. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now