Usmccollector Posted February 23, 2020 Share #226 Posted February 23, 2020 Great bayonet! All this depot made gear is awesome Link to comment Share on other sites More sharing options...
Usmccollector Posted February 23, 2020 Share #227 Posted February 23, 2020 depot made 3rd pattern haversack with mustard canvas and od trim Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Usmccollector Posted February 24, 2020 Share #228 Posted February 24, 2020 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Jake the Collector Posted February 24, 2020 Author Share #229 Posted February 24, 2020 Excellent first aid pouch collection. Link to comment Share on other sites More sharing options...
Usmccollector Posted February 24, 2020 Share #230 Posted February 24, 2020 Thanks Jake! They all came from the same corpsman. He was stationed in China with the China marines in 1927-1928. -raul Link to comment Share on other sites More sharing options...
'Flage Guy Posted February 24, 2020 Share #231 Posted February 24, 2020 Raul, thanks for showing all that fine stuff- that group of Dressing Pouches is unreal Link to comment Share on other sites More sharing options...
Usmccollector Posted February 24, 2020 Share #232 Posted February 24, 2020 Thanks Flage! Means a lot coming from you. Here’s some other depot made gear in my collection; 3 D-ring haversack sets Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Jake the Collector Posted February 24, 2020 Author Share #233 Posted February 24, 2020 Very nice packs. Thanks for sharing. Link to comment Share on other sites More sharing options...
MCDUFF Posted February 24, 2020 Share #234 Posted February 24, 2020 Some lovely eye candy depot made pouches and packs! Thanks for sharing! Link to comment Share on other sites More sharing options...
'Flage Guy Posted February 25, 2020 Share #235 Posted February 25, 2020 Sent from my iPhone using Tapatalk :P Link to comment Share on other sites More sharing options...
GWS Posted February 25, 2020 Share #236 Posted February 25, 2020 Alas, no longer mine, but went to a good home: Link to comment Share on other sites More sharing options...
GWS Posted February 25, 2020 Share #237 Posted February 25, 2020 Another, long gone, but not forgotten: Link to comment Share on other sites More sharing options...
GWS Posted February 25, 2020 Share #238 Posted February 25, 2020 Same belt as above: Link to comment Share on other sites More sharing options...
GWS Posted February 25, 2020 Share #239 Posted February 25, 2020 Last one, still have this one: (Sorry about the color difference between the first two--just an editing error) Does anyone know if these were in fact made at Phila. Depot? I have heard that they were from one source only. Link to comment Share on other sites More sharing options...
'Flage Guy Posted February 25, 2020 Share #240 Posted February 25, 2020 GWS, that Belt and Canteen Cover leave me speechless... Link to comment Share on other sites More sharing options...
Usmccollector Posted February 25, 2020 Share #241 Posted February 25, 2020 That canteen and belt are incredible! Really nice and clean too Link to comment Share on other sites More sharing options...
GWS Posted February 25, 2020 Share #242 Posted February 25, 2020 Thanks for the comments guys. I don't think it was ever issued. I guess the belt doesn't actually fit the depot made gear title---but I couldn't resist! Link to comment Share on other sites More sharing options...
Jake the Collector Posted February 27, 2020 Author Share #243 Posted February 27, 2020 Fantastic additions, GWS. I really like that minty scabbard. Here's a second-pattern canteen cover I picked up recently: Link to comment Share on other sites More sharing options...
TheSandpebbles Posted March 14, 2020 Share #244 Posted March 14, 2020 I just picked up this Meat Can frying pan today for around $17 and I think it was made by the Marine Corps Philadelphia Depot of Supplies. I added the segmented aluminum plate from an M1932 Meat Can I already had, as this would be the correct for a marine corps meat can. If I’m incorrect in this identification, please let me know! Link to comment Share on other sites More sharing options...
TheSandpebbles Posted March 15, 2020 Share #245 Posted March 15, 2020 Last one, still have this one: (Sorry about the color difference between the first two--just an editing error) DSCN0964-1.JPG DSCN0966-1.JPG DSCN0973-1.JPG DSCN0972-1.JPG DSCN0967-1.JPG Does anyone know if these were in fact made at Phila. Depot? I have heard that they were from one source only. Hi GWS, I've always wondered the same! Here is a photo of a marine in Shanghai in 1937 who appears to be sitting next to a Springfield scabbard with a side seam. In this photo of marines in Shanghai in 1937, you can see the top of the scabbard on the lefthand marine, which shows the web belt hook sewn to the scabbard with an extra flap of material (like your scabbard). https://www.gettyimages.com/detail/news-photo/group-of-american-marines-nearing-the-docks-of-shanghai-news-photo/105212176 This last picture shows a Marine in china in the interwar years (1937?) and besides having the USMC specific Springfield sling, might have the seamed scabbard. If you look closely at the leather tip, the stitching appears to end where the leather is folded over like on your example, unlike the regular pattern which has stitching all the way around the leather tip. Link to comment Share on other sites More sharing options...
Jake the Collector Posted March 17, 2020 Author Share #246 Posted March 17, 2020 Great photos, Sandpebbles. Thanks for sharing. The scabbard in the first one is definitely Depot-made, evidenced in the side seam as you mentioned, though the second is more difficult to tell. As for the meat can, I could be wrong, but I think depot-made examples typically have a more oval-shaped hinge plate with larger rivets. Moreover, the hinge appears to be of cast metal rather than stamped metal, unlike those found on depot cans. Again, I could be wrong. My knowledge of meat cans is rather limited. Hopefully others weigh in. Link to comment Share on other sites More sharing options...
TheSandpebbles Posted March 17, 2020 Share #247 Posted March 17, 2020 Great photos, Sandpebbles. Thanks for sharing. The scabbard in the first one is definitely Depot-made, evidenced in the side seam as you mentioned, though the second is more difficult to tell. As for the meat can, I could be wrong, but I think depot-made examples typically have a more oval-shaped hinge plate with larger rivets. Moreover, the hinge appears to be of cast metal rather than stamped metal, unlike those found on depot cans. Again, I could be wrong. My knowledge of meat cans is rather limited. Hopefully others weigh in. Thanks Jake, I hope others weigh in too as I am very interested to know and there is rather limited information on these to be found. I suspect that the hinge plate on the example I posted above is a stamped piece of metal and it lacks the extra support fin seen on the cast hinge plates of both M1910 and M1932 meat cans. The handle is also devoid of any markings or dates. Lastly, the pin holding the handle to the hinge plate is identical to your example posted a while back and unlike any other type I have seen. I have read that DQP meat cans had three or two aluminum rivets, but I have not seen another 3 rivet example. Have you seen a three rivet example and was it more oval-shaped? Information is so scarce and I am appreciative of any details you might know! Link to comment Share on other sites More sharing options...
Jake the Collector Posted March 20, 2020 Author Share #248 Posted March 20, 2020 You raise very good points. I had not considered the lack of support fin or the attachment pin. Taking another look at the design change request submitted by the Depot Quartermaster in 1940, I noticed that not only was the removal of the third rivet recommended, the need for a new die press for hinge manufacture was also noted, as the old die had become worn. The request reads, "In the event of these changes being approved, it is requested that authority be granted to manufacture a new die for manufacturing the new type hinge. The die which is used in the manufacture of the present type hinge is worn out. If the above change is not approved it will be necessary to manufacture a new die for the present type hinge with three holes." This makes me consider whether your example is one fitted with a hinge made on the old die press, hence the slightly different shape. It's looking more and more that you indeed have a depot-made meat can. Link to comment Share on other sites More sharing options...
collector Posted March 24, 2020 Share #249 Posted March 24, 2020 Very interesting about the USMC sling, would anyone have some nice shots of one to compare with regular slings? Link to comment Share on other sites More sharing options...
TheSandpebbles Posted March 25, 2020 Share #250 Posted March 25, 2020 You raise very good points. I had not considered the lack of support fin or the attachment pin. Taking another look at the design change request submitted by the Depot Quartermaster in 1940, I noticed that not only was the removal of the third rivet recommended, the need for a new die press for hinge manufacture was also noted, as the old die had become worn. The request reads, "In the event of these changes being approved, it is requested that authority be granted to manufacture a new die for manufacturing the new type hinge. The die which is used in the manufacture of the present type hinge is worn out. If the above change is not approved it will be necessary to manufacture a new die for the present type hinge with three holes." This makes me consider whether your example is one fitted with a hinge made on the old die press, hence the slightly different shape. It's looking more and more that you indeed have a depot-made meat can. Thank you very much for sharing that information Jake! Somebody was telling me that the Depot didn't produce meat cans between 1930-1940/41 but if their die press was worn out in 1940, it would suggest that they were making them in the late 1930s, at least! Very interesting about the USMC sling, would anyone have some nice shots of one to compare with regular slings? From what I have read, these Marines Corps Variant slings can be seen in the interwar years through the early 1940s. These slings are made of thicker harness leather in a darker shade, are totally unmarked, have a metal staple on each keeper, and have only four sets of adjustment holes on the shorter strap (only two sets visible when slung). It has been suggested that these slings were made on the West Coast by a saddle maker on a Marine base in the 1920s and 1930s. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now