Jump to content

Recommended Posts

phantomfixer
Posted

Fairly straight forward setup...the seal around the 5 gallon can had a few drops but nothing harmful..
initial startup, the burner flared until it warmed up and then I was able to adjust the heat by adding more or less fuel...generally I kept the flow at a very fast drip, almost a steady stream, you could see the individual drops through the flow meter..

Only real advice is to have a long Bic style lighter on hand, if a windy day the flame could blow out until the burner is warmed, and a longer lighter makes it safer to ignite...
and use Coleman fuel versus gasoline...the stove pipe is eye level and the gas exhaust was not pleasant to breathe...coleman fuel might burn cleaner??

 

I was hesitant to fire the stove, because it had been stored, but never fired,, all items were in not used, though not all were period.
The stove itself is dated 1945 and 1944...some of the inner components are 60s dated...so I figured there is no monetary loss in firing it up...and it was educational and fun..
would make for cooking soups or similar style meals...but not for frying eggs and bacon... or maybe I did not get it hot enough...the grid closest to the burner was the hottest...of course...

post-155518-0-47378400-1522760762_thumb.jpg

phantomfixer
Posted

Thanks Dave,

 

Saw on the G where a guy was making a cheese omelette...very optimistic on his part...but what the heck gotta try

Posted

Takes a lot of practice, we had 10+ of these back in the 80's. Tried out the most complete one, not to bad. Try a M-37 and this, WWII cooks knew how to make these work. And then there are the immersion heaters......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...