hink441 Posted May 25, 2017 Share #1 Posted May 25, 2017 I recently acquired this 10" seacoast mortar shell from an antique shop in Norfolk Va. The dealer said it was recovered during dredging operations along the Norfolk waterfront during the 1960s. The shell was heavily pitted and corroded. I wanted to try and clean her up and remove all the corrosion. First I had a Richmond area Civil War artillery expert verify that it was indeed inert and not a danger to anyone. I then decided to try and use the electrolysis method to clean the shell. Here is a picture of the shell before any cleaning. Link to comment Share on other sites More sharing options...
hink441 Posted May 25, 2017 Author Share #2 Posted May 25, 2017 I then set up a home-made electrolysis tank and started 3 1/2 days of electrolysis cleaning. The shell weighs approximately 80lbs. Here is a picture of my setup with the shell soaking. Link to comment Share on other sites More sharing options...
hink441 Posted May 25, 2017 Author Share #3 Posted May 25, 2017 Here is a CW era picture of a 10" seacoast mortar. Link to comment Share on other sites More sharing options...
hink441 Posted May 25, 2017 Author Share #4 Posted May 25, 2017 This is what the shell looked like after the 3-1/2 days of treatment. I then put on some polyurethane for the final touch. Having never done the electrolysis method before, I am very pleased with the results. Link to comment Share on other sites More sharing options...
mdk0911 Posted May 25, 2017 Share #5 Posted May 25, 2017 very nice shell and great work! Link to comment Share on other sites More sharing options...
BILL THE PATCH Posted May 25, 2017 Share #6 Posted May 25, 2017 It's weighs 80 pounds, wow that must have been a terrible weapon to get hit with or even in the vacinity. Good job looks nice Sent from my XT1031 using Tapatalk Link to comment Share on other sites More sharing options...
illinigander Posted May 25, 2017 Share #7 Posted May 25, 2017 Hink- You need to keep a very close on your projectile! It will probably sluff off pieces into nothing. You might want talk to someone in the area with electrolysis experience. I have done several CW salt water projectiles and the minimum time in the tank is one year. A 6.4" Parrott I have has been in for two years and I will leave it for another six months. Good luck. Illinigander Link to comment Share on other sites More sharing options...
268th C.A. Posted May 25, 2017 Share #8 Posted May 25, 2017 Very Cool! I remember when they were dregging for the second Hampton Roads tunnel, They were dregging up tons of stff from Ft. Monroe, Old Point Comfort. Guns at Sea Walls Point (Confederate) , later Sewell's point. After Union General Sewell. Link to comment Share on other sites More sharing options...
hink441 Posted May 25, 2017 Author Share #9 Posted May 25, 2017 Hink- You need to keep a very close on your projectile! It will probably sluff off pieces into nothing. You might want talk to someone in the area with electrolysis experience. I have done several CW salt water projectiles and the minimum time in the tank is one year. A 6.4" Parrott I have has been in for two years and I will leave it for another six months. Good luck. Illinigander Thank you for all the comments. Thanks for the heads up. I will keep a close eye on the shell. I had help from Pete George, and the opinion was that this shell would be okay with 2-4 days of electrolysis. Chris Link to comment Share on other sites More sharing options...
hink441 Posted May 25, 2017 Author Share #10 Posted May 25, 2017 Very Cool! I remember when they were dregging for the second Hampton Roads tunnel, They were dregging up tons of stff from Ft. Monroe, Old Point Comfort. Guns at Sea Walls Point (Confederate) , later Sewell's point. After Union General Sewell. Thanks for the comment, this shell could very well be from those same dredging operations. Chris Link to comment Share on other sites More sharing options...
shellman825 Posted May 26, 2017 Share #11 Posted May 26, 2017 I had a real good friend that did that. He disarmed them and that's what killed him, Mr Sam White RIP buddy. Looks like you did a good job most big shells like that are deep in the sea floor so I can see where Peter said that. Good luck Link to comment Share on other sites More sharing options...
illinigander Posted May 26, 2017 Share #12 Posted May 26, 2017 Peter George is a first-class source. Just saying, In 1973, I traded the NPS a rare SC manual for a CS 6.4" Brooke bolt that had been in sand in a casemate at Fort Sumter from 1890's till 1959 (never was in salt water) and about 2014 it started to sluff-off (word?) potato chip sized pieces of cast iron. I put it the electro system for two years, and I hope it is stabilized but watch it carefully. Illinigander. Link to comment Share on other sites More sharing options...
hink441 Posted May 27, 2017 Author Share #13 Posted May 27, 2017 Wow, that is an interesting story. 1973-2014 then it started to come apart. Why do you think it came apart after so many years? Chris Link to comment Share on other sites More sharing options...
digi-shots Posted May 27, 2017 Share #14 Posted May 27, 2017 Chris, nice find! I recovered a Spanish cannonball over 30 years ago while diving off the Florida Keys. My home-made reverse electrolysis worked great! (all I can remember using was a zinc bucket, lye, battery and I think either zinc or lead chips?) The cannonball had been in salt water for over 225+ years and it still looks good. I never coated it and it has never flaked. One extra thing I did after the electrolysis was to place it in the bathroom toilet tank.... left it there for a few months and let the fresh water flush out any residual salt. It was easy with a 14 1/2# ball, but I don't think a toilet tank could handle an 80 pounder! Thanks for posting! Link to comment Share on other sites More sharing options...
hink441 Posted May 27, 2017 Author Share #15 Posted May 27, 2017 Great story Linda!! Thank you all for the comments and opinions! I will keep a close eye on this one for sure!! Hopefully this one will do okay. If the story from the old man at the antique shop is true, this shell has been out of the sea water for approximately 50 years or so. Chris Link to comment Share on other sites More sharing options...
illinigander Posted May 27, 2017 Share #16 Posted May 27, 2017 Hink441- I have no idea why it took so long to flake, not much salt spray in the air in Mich. My friend who dives in Mobile Bay always "cooks" his projectiles for a minimum of two years. Ken Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now