Jump to content

Winchester-Lee Model 1895 6mm Navy Rifle


varifleman
 Share

Recommended Posts

Here for your viewing pleasure is Winchester-Lee Model 1895 6mm Navy Rifle serial number 18003 with bayonet and scabbard. It was part of the second US Navy contract (serial numbers 15001-20000) inspected by Lt John N. Jordan (J.N.J as stamped on breech in photo 7) which were delivered from 1 August through 6 December 1898. Per the Winchester Repeating Fire Arms letter the serial number was applied to the on July 22, 1898; Caliber: N; received in warehouse on August 12, 1898 and shipped from warehouse on August 20, 1898; Order number 2689. It just missed the Spanish-American War but may have served during the Relief of the Foreign Legations in Peking during the Boxer Rebellion in 1900 or during the Philippine Insurrection 1899-1902. I'll have to see if I can track down the USN or USMC ship/unit which eventually received this rifle.

 

 

010_pix235133637.jpg

009_pix119144536.jpg

008_pix126599199.jpg

006_pix356316403.jpg

004_pix583857838.jpg

003_pix054681005.jpg

Link to comment
Share on other sites

Thanks knd643 for posting the photos; they show up when I use edit function but not in post; at 67 I'm not a computer whiz. Seems I've used up my quota linit for posting directly to forum or is there a way around that?

Link to comment
Share on other sites

  • 3 weeks later...
  • 5 years later...
On 5/20/2015 at 9:48 PM, rayg said:

Nice one! I reload the 6mm ammo and shoot mine, Ray

Ray,

 

I just purchased a 1895 Winchester Lee Navy second contract rifle myself and want to shoot it. Would love to know your reload information. Tired of getting nowhere on the internet stuff.

Link to comment
Share on other sites

I used  17 grs of 2400 and 9 grs black powder with the tennis ball patched with a thin paper napkin to give it a tight seal. The rifle at a 30% angle shot the ball over a 100 -125% yrds. When the rifle is aimed at a 45% angle or a bit more, the ball goes extremly high up and comes down about 90 yrs.
The carboard cup shot holes in the ball, front and back until I put a strip of furnace tape on the bottom of the ball which protected it.
The main thing is to get a real tight fit with the ball that's why I used the napkin. I found this out when we were using older used tennis balls that lost some of the fuzzies and then we used a new one which fit much tighter in the cup it shot a lot further. The napkin acts like a patch in a muzzle loader and made sure the balls fit tightly with no gas leak and it worked great.
It's possible that the powder charge could even be reduced now because the napkin patch wasn't tried with the lower powder loads Ray

Link to comment
Share on other sites

PS I formed the cardboard cup for the neck using a punch the size of the mouth opening of the case neck and glued it in the case or you can use melted wax to hold the cup in the case...Ray

Link to comment
Share on other sites

Here are a box of 20 Remington-UMC 6mm USN rounds; single round; head stamps and S&S Firearms repro clip and wire. I also recently got an original clip/wire and will post photos later. I haven't shot my rifle with the original issue 6mm USN ammo and may wait to get modern reloads if available.  Any idea re production date for this ammo? I'm guessing 1900 - 1920.

image.png.b0cb8e3c6026c0c1ef71a8fd3b5cbfa1.png

image.png.6548430f42d03827043317e726e31aae.png

image.png.5325169f6b23ae8c8c97e9f4e7f2ee25.png

 

image.png.da811d84004cd2a4e6e1ae915bf96ceb.png

Link to comment
Share on other sites

Del56  Sorry my above post was for shooting a grenade out of a Lee Enfield.. Another poster asked that question..

 

I can't recall off hand what the load was as it's been awhile ago. .And my books with the info are at my other home in WI and I'm in Florida....Sorry 

Link to comment
Share on other sites

  • 1 month later...
On 10/14/2020 at 5:19 AM, rayg said:

Del56  Sorry my above post was for shooting a grenade out of a Lee Enfield.. Another poster asked that question..

 

I can't recall off hand what the load was as it's been awhile ago. .And my books with the info are at my other home in WI and I'm in Florida....Sorry 

I sure was scratching my head as I read your reply. Was wondering what universe you were in. Great to know it was ne of those mix up things. My Winchester Lee Navy is  # 16787. Wondering where varifleman got his history as well. I'll post pictures of mine here soon.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...