Jump to content

M4- Anti Flak Helmet - British made / Modified


Paul Reijnders
 Share

Recommended Posts

Paul Reijnders

For pilots, navigators, and door gunners, modified M-1 helmet or M3 Anti Flak helmets greatly improved their chances of surviving an encounter with flak. However, many positions in aircraft, such as cramped upper turrets and lower ball-turrets, were so small that it was impossible to wear a helmet the size of an M-1. The main problem was the helmet sat too high on the head.

The Chief Surgeon of the Eighth Air Force, Colonel Malcolm Grow, was determined to find a solution to the dilemma and developed an anti-flak helmet specifically for aircrew members who occupied the tight confines of turrets. His initial design weighed just over two pounds and looked like a skull cap. Unlike the M-1, the "Grow helmet" as it was often called, did not have an internal suspension. It rested directly on the leather or cloth flying helmet. A prototype was submitted to the Ordnance Department for consideration and was designated as the T3. Tests concluded that while the helmet did not have the protective qualities of the M3, it did improve survivability. The helmet was redesigned as the M4 and placed into service.

The M4 was manufactured in two versions : One in England and the other in the United States. Both were constructed of overlapping pieces of Hadfield Manganese. The British made was covered with dark brown leather and the American made M4 was covered with olive drab twill / cloth.

 

The one below is the British made M4 but modified !! Both sides with two extra studs for ear-protection caps. These caps are also made from Hadfield manganese and covered the same way. During the years of collecting this is the 2nd complete one I ever saw. If there is someone between us who has any information of this rare Anti Flak helmet, please let me know, thanks !!

 

Regards, Paul

post-4905-1297517421.jpg

Link to comment
Share on other sites

Paul Reijnders

Thanks :thumbsup:

 

Again , if someone can help with more info about this helmet :think: , thanks :thumbsup:

 

regards, Paul

Link to comment
Share on other sites

  • 1 year later...

This will interest you: http://www.iwm.org.u...object/30016156

 

post-9199-0-23642200-1360153776.jpg

 

History note

 

 

Introduced experimentally by the USAAF in 1945, nearly 11,000 were produced in order to protect the areas exposed between the helmet and the armoured vest. Early versions were made of leather while subsequent versions were fabric-covered. Sometimes known as the 'Queen Anne', many were sent to war zones but development was halted in June 1945 as other superior ballistic materials were later examined and tested.

 

Physical description

 

 

Neck armour: leather-encased manganese steel sections with dot fasteners and straps. The neck armour forms a high protective collar that is secured around the wearer's neck at the throat, covers the neck and sides and attaches to the M4 series of flak helmets.

Link to comment
Share on other sites

  • 10 years later...
Paul Reijnders

For several years I was looking for this rare T-44 Neck Armor piece, used in combination
with the M4 - Anti Flak Helmet - Britisch made / Modified 1st type.
 

Regards, Paul

 

 

Neck Armour, Type T44 USAAF - 08.JPG

 

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...