Jump to content

Durandal

Members
  • Content Count

    46
  • Joined

  • Last visited

Everything posted by Durandal

  1. Great advice from Johan! I detailed a complete cleaning technique for the TL-122 lights in this post: http://www.usmilitariaforum.com/forums/ind...mp;#entry261959 Though this is specifically for 122As, I've used this same technique for Bs, Cs and Ds successfully. Make sure to use the multi-meter first. Try the continuity setting and place a contact below the switch and one above the switch in the "ON" position, If you get no current, then you know the problem exists in the switch. Not quite sure if it will apply to the light you're working on or not, so proceed at your own
  2. A little late to the party but here are a pair of my batteries. I have a yellow pair as in the above post, but they are burred in a box somewhere. Surprisingly one of these actually still puts out enough current to be useful. If only the second one did as well they may well have been usable...
  3. Very interesting picture!!! Any idea of the date on it?
  4. Great looking light, rambob. A prime example! I notice that it even has the rubber washer around the base, which in my experience is often badly degraded or missing altogether. I've often wondered the same thing about the filters and the white spacers, unfortunately I haven't been able to find any official sources that answer the question.
  5. Also, as mentioned above, here is a picture of what I believe to be a complete set of US TL-122 series lights representing every model made by each manufacturer. Please let me know if you are aware of any lights that are missing!! Enjoy!
  6. Hi all, Here is the white bodied light I was mentioning. It is actually semi-transparent. It's made by GITS and is marked 122 on the side of the head. I believe it to be a civilian model. I've also included a picture of some July, 44 dated batteries. I was lucky enough to get these with one of the flashlights in my collection. They are in great condition, and one of them actually still has a charge, believe it or not!
  7. I have a "clear" model in my collection, which I guess could be considered white; It has a red lens ring. If you want to see some pics i can post them up. There's a thread about these lights on here somewhere that has lots of examples... I've been collecting these lights for a quite a while now and actually have examples all models (A,B,C and D. I'm missing a couple with the plastic switches) produced by all manufacturers that I'm aware of, if anyone is interested in pictures.
  8. Just thinking out loud here, but I wonder if there is some way to detect modern applied stampings? Certainly modern inks must differ from the inks used on original items. UV Light, perhaps, or something similar? I know that a similar technique is sometimes applied to German Iron Cross ribbons (new ones tend to glow brightly). Of course this wouldn't really help over ebay, but might provide a way to protect yourself at a show? Durandal
  9. [/quo #1 Looks like you can slide the light onto something? #2-5 Looks like you can take the light and press it onto something. I typed flashights in the SEARCH above. When I got the results some of the photos has the same cap indentations as mine. I think the indentations you're referring to might be where the metal lanyard ring is supposed to be? This was something that was added to post-WW2 flashlights, I believe, as I have never seen an original TL-122D with a lanyard ring, only the MX-991/U type models. Maybe the ring is missing from yours? It would be helpful if you co
  10. To my knowledge the 122C was the third production model of the TL-122 series light, being replaced before the end of WWII by the TL-122-D. The D model was produced after the war, but was later replaced the the MX-991 and other models. As far as the crimp in the belt hook goes, all of my WWII TL-122s have this crimp. I would say it is standard feature, and would be very interested to see a light without this crimp. I would say you have a WWII era light body with an assortment of other parts added to it. But that's just my 2 cents Cheers, Fletcher
  11. Hi Andrew, Just wondering if you had any luck with the switch on your 122A. Fletcher
  12. I have restored a number of 122s that were non-functional. I'll outline the steps i normally take. AndrewA74, you've taken many of the same first steps that I do. First, I get 2 new D cell batteries that I know have a good charge. Then i also get a good PR9 (2.7V, .15A) bulb, and put the batteries and bulb in the light. If I don't get any results here, obviously there is a break in the circuit somewhere, so it's time to break out my multi-meter. With the switch in the "On" position, and the batteries still in (you'll have to remove the bulb assembly for this), check both terminals
  13. Hi, Sorry for the delay in getting back to you. I've consulted my collection. None of my 122As have gaskets, and though some of the Bs do, I suspect they were added by the original owners as I understand the difference between the B and C models was that the C was waterproof, while the B was not. My C and D models have 3 gaskets, as you describe: 2 on the lens, and one on the base compartment. The lens gaskets appear variably on both sides of the lens, or on either side of the metal reflector. Cheers, Durandal
  14. I've got a pretty extensive collection of TL-122s. I'm visiting my family for the holidays, but when i get home, i'll check for you. -Durandal
  15. Brian, Thanks for the info; definitely an interesting piece. Fletcher
  16. Brian, I've never seen that model of signal light gun before; does it have any markings/an official designation? Do you know if it found very widespread use? Fletcher
  17. *DROOL* What a find!!! Congrats to your friend.
  18. love the Lancaster. My grandfather was a flight engineer with the RCAF and trained in them during the war, but finished his training the month after the war ended. He flew a couple supply missions and what not, and I remember him telling me they were instructed not to fly over the Russian lines or they were likely to get shot down! I go to university in Hamilton, Ontario, which is also the home of the Canadian Warplane Heritage museum. The museum has one of only 2 (i think) flying lancasters left in the world... I gotta say there really is nothing like a flyby by a lanc... those merlins r
  19. I would have to agree with this. During my hours on ebay i've seen a few of these in that range, though i can't recall ever seeing one with the pouch. Perhaps that might push the price up a few $$.
  20. Looks like a US M1956 belt to me. They started using the vertical weave after 1966 i think. It also used a ball style buckle instead of the "T" found on WWII belts. That's my take... but I'm no expert.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.