Research on Philippine Constabulary Swords (need help)

[ron norman]

I attach a document and photo. Please check them and see if you can help.

DOC:Philippine Constabulary Sword Numbering.
Please refer to photograph.
Number 1. Number located on the very bottom of the DRAG
Number 2. Number located on the side of the TANG
Number 3. Number located on the inside of back strap
Number 4. Number stamped in the wood and covered by the back strap when assembled
Number 5. Number located on the back of the guard next to the tang hole. covered by the pummel when assembled

Note: All the numbers appear to be the same size and style on the BARON and Crown over H sword scabbards.
There does not appear to be any relation to the numbers on the bottom of the scabbard to the sword numbering or length .
The numbers are all the same on the parts of the hilt and are the same style and size as the numbers found on the bottom of the scabbards on both the BARON and Crown/H sword scabbards
The numbers on the tang and all parts of the hilt are the same in style and number on the (5) Crown / H swords I examined.
If possible can you take apart the hilt on your sword and determine if numbered in the same locations, style of the number and which model it is.

Thanks. RON NORMAN

Photo:

[Spathologist]

Crown over H saber.

 

#64 at 1,3,4, and 5 on the photo.

 

#27 on the edge of the drag.

 

Same locations as the photo, numbers are all the same size and font.